Spare parts for cranes Zavod PTO Hooks, suspensions, grips, etc.

THIS EQUIPMENT IS NOT AVAILABLE. ASK FOR THE SELECTION OF AN ANALOGUE.

Cargo crane hooks with a cylindrical shank are manufactured by hot stamping or free forging with subsequent machining of the shank and are used on cranes of all types, hoists, blocks as a load-lifting body.

• Crane hooks No. 1-26 types A and B. Technical description.

Hook suspensions consist of movable blocks of polispast and hook, united by a traverse and cheeks.

• Hook suspensions with a load capacity from 3.2 to 100 tons. Technical description.

Mechanical grips for general-purpose goods. The enterprise manufactures mechanical clamps of the pincer type, mechanical eccentric type, mechanical clamping type, mechanical fork type, mechanical rocker type, mechanical wedge type, mechanical pin type as well as magnetic grips

• Mechanical grips in the assortment. Technical description.

Cargo crane drums are used for winding the traction rope of crane mechanisms.

• BC cargo drums with a diameter D = 200-1000 mm long L up to 3000 mm with any cutting step. Technical description.

Crane blocks are used in polispast blocks of hook suspensions, in mounting and equalizing blocks.

• Crane blocks with a diameter of D1 =200-1000 mm. Technical description.

Double-chord crane wheels, single-chord and non-chord running crane wheels with a cylindrical rim, as well as single-chord crane wheels with a conical rim. Two-chord wheels prevail.

• Crane wheels with diameters from 200 mm to 1000 mm according to GOST 28648-90. Technical description.

Electrohydraulic crane pad brakes of normally closed type (TCG) are designed to stop and hold the shafts of lifting and transport vehicles in a braked state when the drive is not working.

• Crane brakes TKG-160, TKG-200, TKG-300, TKG-400, TKG-500. Technical description.

Brake pulleys are used in conjunction with pad brakes and, as a rule, are installed between the shaft of the electric motor and the input shaft of the gearbox or on the reverse side of the input shaft of the gearbox.

• Brake pulleys with diameter D = 160, 200, 300, 400, 500, 600, 700 mm. Technical description.

Price list for hook pendants

Price list for mechanical grips

Price list for drums

Price list for crane wheels

Questionnaire for non-drive drums

Questionnaire for drive drums